Author Topic: Angle Lever Cam 49/49U  (Read 5841 times)

0 Members and 1 Guest are viewing this topic.

rbwillnj

  • Global Moderator
  • ****
  • Posts: 1216
    • View Profile
    • Star Machine Works
Angle Lever Cam 49/49U
« on: April 04, 2011, 05:11:32 pm »
I little while back a question came up about the difference between the Angle Lever Cam for a Progressive and a Universal, 49 and 49U.

The difference is that because the steel base of a Universal is slightly larger in diameter than the steel base of a Progressive, the 49U steps out further from the tool head than the 49.   See attached pictures.

Star Machine Works
Star, the original blue Press.  Made by machinist, not machines.
www.StarMachineWorks.com

varmintpopper

  • Active Members
  • ***
  • Posts: 299
    • View Profile
Re: Angle Lever Cam 49/49U
« Reply #1 on: April 04, 2011, 11:20:49 pm »
rbwillnj

Thanks for sharing that info, I remember that topic awhile back, and now I can quit scratching my head over it, because now I Know.

Good Shooting

Lindy