Author Topic: SMALL SCREW & WASHER UNDER THE STEEL BASE  (Read 5277 times)

0 Members and 1 Guest are viewing this topic.

askimball (Doc)

  • Active Members
  • ***
  • Posts: 471
  • Cell - 318-518-0829 Central Time
    • View Profile
SMALL SCREW & WASHER UNDER THE STEEL BASE
« on: October 02, 2011, 08:24:53 pm »
Below is the Information about the small screw & washer under the Steel Base 8)

Info:
This Screw & Washer is used to Prevent the #24 Primer Punch from dropping below the
#12/12U Steel Floor Base, thus, not letting the Press lock-up..... :o ::) 8)

Specs:

SCREW:

Slotted Fillister = 6-32 x 6/32"

WASHER:
Diameter = .375 OD
Screw Hole = .136"
Thickness = .038 varies
« Last Edit: October 02, 2011, 09:11:08 pm by askimball (Doc) »
Doc - I.Y.A.A.Y.A.S.
Retired Police Captain