Author Topic: 38 super lightweight colt  (Read 2678 times)

0 Members and 1 Guest are viewing this topic.

tguntrader

  • Active Members
  • ***
  • Posts: 47
    • View Profile
38 super lightweight colt
« on: January 17, 2014, 04:29:02 PM »
Can any that has done the leg work tell me what  would be a good load to shoot in this gun  that would not  beat it up to bad that I can load on my star with a 00 slide?                                thanks  tguntrader
« Last Edit: January 17, 2014, 04:30:56 PM by tguntrader »

Welsh Rifleman

  • Active Members
  • ***
  • Posts: 47
    • View Profile
Re: 38 super lightweight colt
« Reply #1 on: January 17, 2014, 05:00:51 PM »
Hello.....many years ago, I used to shoot a 38 super 1911 with a long slide....set up by a local gunsmith....Eddie Jimenea.  I was shooting it double tap and it was a lot of fun seeing all the "two bullets holes touching".  I was using a load of Winchester 231 and a 150 grain lead round nose.  I don't remember the exact load....but I am sure you can find it in a lot of places.

George
« Last Edit: January 18, 2014, 12:48:22 AM by Welsh Rifleman »
NRA Patron
American Single Shot Rifle Association
Texas State Rifle Association
Single Action Shooting Society

rbwillnj

  • Global Moderator
  • ****
  • Posts: 1074
    • View Profile
    • Star Machine Works
Re: 38 super lightweight colt
« Reply #2 on: January 17, 2014, 06:44:34 PM »
I can't say I did an exhaustive study, but it worked up a load to use in my 38 Super using the Lyman 356637 bullet which weighs about 155 grains with my alloy.   I used 4.0 and 4.2 of Unique.   Both shot well enough for IDPA.   Can't remember if I needed 4.2 to make power factor in IDPA or if the 4.0 would do it.   It was not a heavy load.
Star Machine Works
NRA Patron Member

tguntrader

  • Active Members
  • ***
  • Posts: 47
    • View Profile
Re: 38 super lightweight colt
« Reply #3 on: January 18, 2014, 10:32:45 AM »
THANKS Guy,s for the help Bruce I will try the load you said.      Tguntrader

 

anything
anything