Author Topic: ister and phelps press  (Read 4550 times)

0 Members and 1 Guest are viewing this topic.

williss

  • Posts: 2
    • View Profile
ister and phelps press
« on: June 02, 2018, 01:37:40 pm »
hi, first post.
i just bought a star press in 38/357 and a phelps in 45 acp.
both have the 5/8ths charge bars.
 i have all the bushings from # p-1 thru #p- 22 missing # 5, #p-3 was purchased from Hornady as H-3.
i want to throw close to 3.7 gr bullseye for 45 acp.
powder bushing charts on the internet are confusing.
are the bushings by vmd or gr.
the 45 acp press was set up for the 1/4inch charge bar at 3.7 gr bullseye.
it was changed to the 1/2 inch charge bar to use the same bushings as the star 38/357 press.
i hope this make sense.
i want to throw 3.7 gr. bullseye for 45 acp.
thanks, Willis.

« Last Edit: June 02, 2018, 07:08:13 pm by williss »

williss

  • Posts: 2
    • View Profile
Re: ister and phelps press
« Reply #1 on: June 02, 2018, 09:32:53 pm »
hi guys,
after searching here i found a post by Fc60 from Oct. 2010 with a PDF of what i was looking for.
thanks anyway.