Author Topic: Convert STAR Progressive to load 9mm ?  (Read 254 times)

0 Members and 1 Guest are viewing this topic.

bulletmen

  • Active Members
  • ***
  • Posts: 5
    • View Profile
Convert STAR Progressive to load 9mm ?
« on: July 03, 2018, 05:59:53 PM »
Is it possible to convert a STAR Progressive to load 9mm ammo ? New shell plate and dies of course. Make a plug for drop out hole . What else ?

Guess it would work OK as is for 32 S&W Long with dies and shell plate ?

Just picked up another Progressive and was thinking of an option.

Happy Independence Day !

rbwillnj

  • Global Moderator
  • ****
  • Posts: 1074
    • View Profile
    • Star Machine Works
Re: Convert STAR Progressive to load 9mm ?
« Reply #1 on: July 04, 2018, 01:21:08 AM »
The steel base of a Star Progressive is a smaller diameter than a Star Universal.   Most 9MM shell plates won't actually fit on a Star Progressive.  Larger calibers definitely won't fit.   Also, the Progressive is designed to drop the finished round out the bottom, and there is no place to remove a loaded round from the side.   Since the 9MM round is rimless, it is held in the shell plate by its extractor groove, and cannot drop out the bottom of the machine.

You could machine the rim of the steel base so a 9MM shell plate would fit, and you could machine the rim of the steel base so the finished round could be extracted from the side.  You would also need to come up with a base plug that would fit the Progressive, and a way to hold it in place.

Bruce Williams
Star Machine Works LLC
Star Machine Works
NRA Patron Member

fc60

  • Active Members
  • ***
  • Posts: 398
    • View Profile
Re: Convert STAR Progressive to load 9mm ?
« Reply #2 on: July 04, 2018, 01:15:59 PM »
Greetings,

Is the machine 38 Special; or, the less common 32 S&W Long?

32 S&W Long cases would not be a good fit in the 38 Special Progressive without adding the straps common to the Universal machines.

Cheers,

Dave

bulletmen

  • Active Members
  • ***
  • Posts: 5
    • View Profile
Re: Convert STAR Progressive to load 9mm ?
« Reply #3 on: July 05, 2018, 06:22:53 PM »
It is a lightly used 38 Special. From playing with a couple of machines I guess it might be possible to use it to load 38 ACP ( with proper size die). Would like to maybe dedicate it to 9mm ?

z4lunch

  • Active Members
  • ***
  • Posts: 34
    • View Profile
Re: Convert STAR Progressive to load 9mm ?
« Reply #4 on: July 06, 2018, 05:05:57 PM »
I have a 38 progressive I load  38 super on it, with the 38 special shell plate
Steve

bulletmen

  • Active Members
  • ***
  • Posts: 5
    • View Profile
Re: Convert STAR Progressive to load 9mm ?
« Reply #5 on: July 08, 2018, 03:47:28 PM »
Tried running a few 38ACP cases through the 38 Spl shell plate, worked OK. The cases dropped through the hole too. Guess a 38ACP size die and adjust the expander carefully and it should work OK. Thanks to all for the feedback.

Rolling Stone

  • Active Members
  • ***
  • Posts: 76
    • View Profile
Re: Convert STAR Progressive to load 9mm ?
« Reply #6 on: July 08, 2018, 06:38:23 PM »
I had to shorten the expander on the one I have set up for 9mm. The length of the expander lets it hit the bottom of the case before it expands the mouth without shortening.  Look on my old posts for more info on the conversion.

 

anything
anything