StarReloaders.com Discussion Forum

Star Reloaders Discussion Forums => Stars Want to Sell/Want to Buy => Topic started by: rbwillnj on August 15, 2011, 01:38:18 pm

Title: Rebuilt Powder Magazines
Post by: rbwillnj on August 15, 2011, 01:38:18 pm
Just a Reminder, I rebuild Powder magazines.   Send your old plastic or aluminum powder magazines to me and I will machine a new 12" polycarbonate tube to fit your hardware.   $25 plus return shipping.    Don't forget to include the lid!  If you don't have a lid, I have those for $20.

I also have complete new powder magazines for $85.

I have a few Brewster Powder Magazines available that feature an integral powder shut off.  These have been rebuilt with a new tube.   $50 each.


Bruce Williams
Star Machine Works
Title: Re: Rebuilt Powder Magazines
Post by: 1960 on August 15, 2011, 10:24:59 pm
Can you supply a lid?  What about a shutoff valve?
Thanks, tt
Title: Re: Rebuilt Powder Magazines
Post by: rbwillnj on August 15, 2011, 11:42:32 pm
I can make a new lid for you.   They are $25.   

I don't do shut off valves at this time, though I have a design I have considered making.   However, maurilew makes a very nice Powder drain that obviates the need for a powder shut off.

Title: Re: Rebuilt Powder Magazines
Post by: Pappy on December 12, 2011, 10:51:25 pm
Quick turn around time and a Top Notch job!!! I am very happy with all three. Thank You.. JP
Title: Re: Rebuilt Powder Magazines
Post by: 333OKH on May 18, 2012, 11:37:02 pm
I can tell you from experiance, if Bruce builds it, it is superb, i dont mind giving credit, where credit is due, George.
Title: Re: Rebuilt Powder Magazines
Post by: Crosbyman on June 06, 2013, 08:44:18 am
Please contact me; I need one rebuilt with a cap.
281 457 1204 working hours Central time.
Title: Re: Rebuilt Powder Magazines
Post by: diamon4u on June 15, 2013, 11:20:01 am
Hi-I am in need of an00 powder slide housing for my spare 45 universal head. Can ou supply?  Thanks
Title: Re: Rebuilt Powder Magazines
Post by: thebigmac on June 24, 2013, 09:49:27 pm
   Hey Bruce; I need a powder magazine and cap.  I can mail you
 my base part if needed. Please advise me your name, addy, & cost. PMO will follow.  Thanks  thebigmac
Title: Re: Rebuilt Powder Magazines
Post by: thebigmac on June 25, 2013, 08:18:39 pm
   Bad e-mail address. It has been changed, please resend.  Thanks,  Mac
Title: Re: Rebuilt Powder Magazines
Post by: 1TonyE on July 13, 2014, 12:21:07 am
Bruce,

I'll also want a powder mag rebuilt too. I think the total cost of the powder mag and lee case adapter will be $75?

If that is incorrect, let me know.  Oh, I need your address to send the powder mag to you.

Thanks and looking forward to doing business with you!

Tony
Title: Re: Rebuilt Powder Magazines
Post by: 1TonyE on August 17, 2014, 08:08:36 am
Bruce

I received my rebuilt powder mag a couple of days ago. Wow...that thing is beautiful.  Tight fit with the cap and base. Love It!!

The workmanship is far above and beyond what I expected. AND it was faired priced too.

Thanks! !

Tony
Title: Re: Rebuilt Powder Magazines
Post by: Buckhunter on September 08, 2014, 01:05:56 pm
 
   :D Bruce,  I need two of your 12" polycarbonate tubes to replace
 my two powder metal magazines. So, I need to send you my two magazines
 and a total of $60 for two 12" powder magazines and the shipping?
 I have your address on a card that you had sent me.
 Thanks, Buckhunter
 
Title: Re: Rebuilt Powder Magazines
Post by: Danielsan on January 21, 2015, 10:42:19 pm
Bruce,
PM sent - LMK please...
Thanks! Best regards, Daniel
Title: Re: Rebuilt Powder Magazines
Post by: Danielsan on January 22, 2015, 05:32:52 am
Thank you Sir! :)
Title: Re: Rebuilt Powder Magazines
Post by: rbwillnj on December 01, 2019, 02:24:35 pm
Bump