Messages

16

Stars Want to Sell/Want to Buy / Powder magazine (No longer needed)

« on: December 16, 2017, 02:51:51 pm »

 I need a clear plastic Powder Magazine Tube to replace a broken
 tube or a complete Plastic Powder Magazine Tube for my Star Reloader.
 E-mail me at:  buckhamman     at      comcast     dot     net

 Thanks, Buckhunter

  Bruce Williams is building me a Powder Magazine Tube, I have been
  buying and selling with Bruce for years and since he acquired the Star
  parts from California he is the man to go to for star parts. When the
  guy in California had the parts I could never get in touch with him,
  Bruce is the opposite as he answers right away.
  Thanks everyone for your input. I no longer need a Powder Magazine.
 
  Buckhunter

17

Stars Want to Sell/Want to Buy / Re: Two Star Universals for sale These Universal's have been sold!

« on: April 23, 2017, 07:27:48 pm »

 

 All my Star Parts and equipment have been Sold, One guy bought
 everything, including Two Universal's, Four Tool Heads and a lot
 of Star spare parts!


I have two really nice Star Universals for sale, both
have Hulme case feeders, Adjustable Hoag Powder Bars & Crimp dies. one has
Factory tool head handle and the other has a roller handle. I also have four
really nice tool heads, three have all the dies, one has a couple dies but missing
other parts. If interested I can send pictures to anyone that is really interested
in buying any of these reloaders or tool heads. I have a lot of spare parts that
are also for sale as I have stopped reloading because of my age. If you are looking
for really nice Star equipment you don't want to pass up this chance to own some
great Star equipment.

 Buckhunter

Buckhunter, See my name in Members section under Buckhunter!
 Nelson G. Hamman     buckhamman   at   comcast   dot    net
 717  530-5854

18

Stars Want to Sell/Want to Buy / Re: Two Star Universals for sale

« on: April 07, 2017, 07:12:32 pm »

David, other spare parts are large and small pick-up tubes and large and small
Primer magazine tubes, Plastic tubes for Hulme case feeder (Small to Large length's.


Buckhunter

19

Stars Want to Sell/Want to Buy / Re: Two Star Universals for sale

« on: April 07, 2017, 07:02:49 pm »

 David, I have a spare tool head in 45 ACP, Two with 38 Special dies and one with
38 Special dies but missing three other parts. All four are very nice with no rust
and a very shine. All have  Star markings stamped on top.

Both Star Universal Reloaders have 38 Special dies. I would like to have $850.00
for each of these two Universals. $350 for each of the three tool heads that are complete. $150 for the one that has 38 Special dies but missing the 49U Angle
lever cam, shell expander plug & powder measure spout. All my tool heads have
the Star markings on the top.
I have numerous spare parts like springs, Star die box,s shell plates, one adjustable
powder slide, OO powder slides with different size powder drop holes. Small and
large primer slides, Small and large primer punch bushing's Small and large primer
punch's. Their are a lot of other parts that I have not bothered getting out of the
box of spare parts.
   I have bought and sold a lot of Star Universal's and these are the best of all of
them. I have had 44 Special, 9mm, 45ACP and 380 Star Universal's and sold them
all except these two 38 Special's. I have instruction books and spare parts list's
for the Star Universal Equipment. I hope I have answered your questions. I would
sell all for a reasonable price. So, someone make me an offer?


Buckhunter        E-Mail me at:   buckhamman   at    comcast    dot   net


 


Do you have a list with asking price for what you have to sell ?
What dies are in the extra tool heads ?

David

20

Stars Want to Sell/Want to Buy / Two Star Universals for sale, They have been sold along with all my Star parts!

« on: April 07, 2017, 03:18:19 pm »

I have two really nice Star Universals for sale, both
have Hulme case feeders, Adjustable Hoag Powder Bars & Crimp dies. one has
Factory tool head handle and the other has a roller handle. I also have four
really nice tool heads, three have all the dies, one has a couple dies but missing
other parts. If interested I can send pictures to anyone that is really interested
in buying any of these reloaders or tool heads. I have a lot of spare parts that
are also for sale as I have stopped reloading because of my age. If you are looking
for really nice Star equipment you don't want to pass up this chance to own some
great Star equipment.


Buckhunter, See my name in Members section under Buckhunter!
 Nelson G. Hamman     buckhamman   at   comcast   dot    net
 717  530-5854

21

Stars Want to Sell/Want to Buy / Chevron Case Feeder

« on: August 16, 2016, 02:27:25 pm »

  This Chevron Case Master Feeder has been sold.  Buckhunter

 I have  Chevron Case Master Feeder that I'm no longer using
 for sale for a reasonable price. It looks like new. Please contact
 me and make a bid. It is just laying around and not getting used.
 Check me out on members for this site.


 Buckhunter             buckhamman    at    comcast     dot     net

22

Stars Want to Sell/Want to Buy / Re: Looking for new #22 Primer slide ( Both)

« on: April 23, 2016, 11:46:08 am »

 

 rbwilliams853 at gmail  dot com , Bruce Williams is a great source as he has taken over parts supply for Star Machine Works.
rdaniels36  at cox dot  net , Richard Daniels is another great source for star parts. Hope this helps. Buckhunter
buckhunter  at  Comcast  dot   net

23

Stars Want to Sell/Want to Buy / Re: Adjustable Powder Bar

« on: May 24, 2015, 10:32:37 am »

Just thought you'd like to know abettertrip.com sent you $123.00 USD.
 
 Easygoing 

 Thanks Kenneth, I will get Adjustable powder slide packaged up
 and I will send you a tracking number when I ship.

 Buckhunter 

24

Stars Want to Sell/Want to Buy / Re: Adjustable Powder Bar

« on: May 23, 2015, 08:37:06 pm »

 Can't wait! ,  Thanks for the E-Mail, I will hold the adjustable
 powder slide for you.


 Buckhunter

25

Stars Want to Sell/Want to Buy / Re: Adjustable Powder Bar Note: All Adjustabe slides have been sold.

« on: May 11, 2015, 02:14:30 pm »

   I have one Adjustable Powder slide left, This one is
   brass and was made by Barrel Tester. I can sell you
   this one for $115.00 plus $8.00 for shipping.

  Buckhunter    buckhamman    at    Comcast   dot   net

  Note: The Hoag Adjustable Powder Slide has been sold.
  Note: The Brass Adjustable Powder Slide has also been
           sold. Thanks everyone!

* P1010001.JPG (74.9 kB, 480x261 - viewed 0 times.)

26

Stars Want to Sell/Want to Buy / Re: Adjustable Powder Bar. Note: All Adjustabe slides have been sold.

« on: May 11, 2015, 02:11:46 pm »

     I have one Adjustable Powder slide left, This one is brass
     and made by Barrel Tester. I can sell you this one for
     $115.00 plus $8.00 for shipping.

    Buckhunter    buckhamman    at    Comcast   dot   net

  Note: The Hoag Adjustable Powder Slide has been sold.
  Note: The Brass Adjustable Powder Slide has also been
           sold. Thanks everyone!

* P1010001.JPG (74.9 kB, 480x261 - viewed 0 times.)

27

Stars Want to Sell/Want to Buy / Re: For Sale

« on: March 15, 2015, 01:56:56 pm »

 Tom,  I have the check ready to mail for this tool head, I remember
 the great trade (Star parts) with you for 45 ACP shell cases that we
 made a while ago. That was a fantastic transaction and I am looking
 forward to receiving the tool head.

 Buckhunter

28

Stars Want to Sell/Want to Buy / Re: WTS Primer Magazines, Primer Pickups and Follower Rods

« on: March 15, 2015, 11:24:38 am »

 I agree with the guys above, Bruce is wonderful to deal with and
 always provides outstanding parts and anything that he makes for
 the Star equipment is first rate. He has provided large powder
 magazines, Primer magazines and follower rods for me and all of
 these products are very well made by him. We in the Star community
 are lucky to have someone of his caliber that can provide wonderful
 parts for our Star machines. Five Stars for Bruce *****.


 Buckhunter

29

Stars Want to Sell/Want to Buy / Re: WTS star loader 45 acp case feeder manual index

« on: February 21, 2015, 07:58:50 pm »

 I bought the above Star Universal 45 ACP w/manual indexer and want
 everyone to know That this man stands by his word and we had a great
 transaction and I could not be happier with this Star Universal 45 ACP.
   Thanks riporter507.

  Buckhunter

30

Stars Want to Sell/Want to Buy / Re: hulme case feeders (clones)

« on: January 25, 2015, 10:58:57 am »

 I have one cloned Hulme case feeder and I ordered another from Jerry. The
 one cloned case feeder that I have works fine and I'm looking forward to
 receiving this cloned case feeder that is on the way to me. So, don't be afraid
 to buy a Cloned case feeder as they work just fine.


 Buckhunter