Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - Buckhunter

Pages: 1 2 3 4 5 6 »
1
Stars Want to Sell/Want to Buy / Moon Case Kicker for Sale.
« on: Yesterday at 04:15:24 PM »
 I have a Moon Case Kicker that I want to sell, I have the instructions
 for installation and parts list from Ray-Vin who sells this case kicker.
   It looks like new and is well made, I have used the Moon Case
 kicker in the past and it works very well. I have no use for it as
 I am in the process of selling all my reloading equipment.


 Thanks,
 Buckhunter    buckhamman   at    comcast     dot   net

2
 Thanks, I was looking for spare parts for my Star Reloaders, Let me know
 if any spare parts are for sale besides the two Star Reloaders.


 Buckhunter     buckhamman      at      comcast     dot   net

3
Stars Want to Sell/Want to Buy / Re: Star Lubricators Sold! Sold!
« on: February 12, 2018, 12:16:49 PM »
Use my e-mail address listed under  "Buckhunter "  in the members listing.

 Buckhunter

4
Stars Want to Sell/Want to Buy / Re: Star Lubricators Sold!
« on: February 12, 2018, 12:14:27 PM »
Wared45   at   America on line dot com
 This is not a valid e-mail address: [no [no e-mail]@.com

5
Stars Want to Sell/Want to Buy / Star Lubricators sold!
« on: February 11, 2018, 07:18:23 PM »
Wared45,  I need an e-mail address.

 Buckhunter      buckhamman     at      comcast      dot     net

6
Stars Want to Sell/Want to Buy / Powder magazine (No longer needed)
« on: December 16, 2017, 02:51:51 PM »
 I need a clear plastic Powder Magazine Tube to replace a broken
 tube or a complete Plastic Powder Magazine Tube for my Star Reloader.
 E-mail me at:  buckhamman     at      comcast     dot     net

 Thanks, Buckhunter

  Bruce Williams is building me a Powder Magazine Tube, I have been
  buying and selling with Bruce for years and since he acquired the Star
  parts from California he is the man to go to for star parts. When the
  guy in California had the parts I could never get in touch with him,
  Bruce is the opposite as he answers right away.
  Thanks everyone for your input. I no longer need a Powder Magazine.
 
  Buckhunter

7
 

 All my Star Parts and equipment have been Sold, One guy bought
 everything, including Two Universal's, Four Tool Heads and a lot
 of Star spare parts!


I have two really nice Star Universals for sale, both
have Hulme case feeders, Adjustable Hoag Powder Bars & Crimp dies. one has
Factory tool head handle and the other has a roller handle. I also have four
really nice tool heads, three have all the dies, one has a couple dies but missing
other parts. If interested I can send pictures to anyone that is really interested
in buying any of these reloaders or tool heads. I have a lot of spare parts that
are also for sale as I have stopped reloading because of my age. If you are looking
for really nice Star equipment you don't want to pass up this chance to own some
great Star equipment.

 Buckhunter

Buckhunter, See my name in Members section under Buckhunter!
 Nelson G. Hamman     buckhamman   at   comcast   dot    net
 717  530-5854

8
Stars Want to Sell/Want to Buy / Re: Two Star Universals for sale
« on: April 07, 2017, 07:12:32 PM »
David, other spare parts are large and small pick-up tubes and large and small
Primer magazine tubes, Plastic tubes for Hulme case feeder (Small to Large length's.


Buckhunter

9
Stars Want to Sell/Want to Buy / Re: Two Star Universals for sale
« on: April 07, 2017, 07:02:49 PM »

 David, I have a spare tool head in 45 ACP, Two with 38 Special dies and one with
38 Special dies but missing three other parts. All four are very nice with no rust
and a very shine. All have  Star markings stamped on top.

Both Star Universal Reloaders have 38 Special dies. I would like to have $850.00
for each of these two Universals. $350 for each of the three tool heads that are complete. $150 for the one that has 38 Special dies but missing the 49U Angle
lever cam, shell expander plug & powder measure spout. All my tool heads have
the Star markings on the top.
I have numerous spare parts like springs, Star die box,s shell plates, one adjustable
powder slide, OO powder slides with different size powder drop holes. Small and
large primer slides, Small and large primer punch bushing's Small and large primer
punch's. Their are a lot of other parts that I have not bothered getting out of the
box of spare parts.
   I have bought and sold a lot of Star Universal's and these are the best of all of
them. I have had 44 Special, 9mm, 45ACP and 380 Star Universal's and sold them
all except these two 38 Special's. I have instruction books and spare parts list's
for the Star Universal Equipment. I hope I have answered your questions. I would
sell all for a reasonable price. So, someone make me an offer?


Buckhunter        E-Mail me at:   buckhamman   at    comcast    dot   net


 


Do you have a list with asking price for what you have to sell ?
What dies are in the extra tool heads ?

David

10
I have two really nice Star Universals for sale, both
have Hulme case feeders, Adjustable Hoag Powder Bars & Crimp dies. one has
Factory tool head handle and the other has a roller handle. I also have four
really nice tool heads, three have all the dies, one has a couple dies but missing
other parts. If interested I can send pictures to anyone that is really interested
in buying any of these reloaders or tool heads. I have a lot of spare parts that
are also for sale as I have stopped reloading because of my age. If you are looking
for really nice Star equipment you don't want to pass up this chance to own some
great Star equipment.


Buckhunter, See my name in Members section under Buckhunter!
 Nelson G. Hamman     buckhamman   at   comcast   dot    net
 717  530-5854

11
Stars Want to Sell/Want to Buy / Chevron Case Feeder
« on: August 16, 2016, 02:27:25 PM »
  This Chevron Case Master Feeder has been sold.  Buckhunter

 I have  Chevron Case Master Feeder that I'm no longer using
 for sale for a reasonable price. It looks like new. Please contact
 me and make a bid. It is just laying around and not getting used.
 Check me out on members for this site.


 Buckhunter             buckhamman    at    comcast     dot     net

12
 

 rbwilliams853 at gmail  dot com , Bruce Williams is a great source as he has taken over parts supply for Star Machine Works.
rdaniels36  at cox dot  net , Richard Daniels is another great source for star parts. Hope this helps. Buckhunter
buckhunter  at  Comcast  dot   net

13
Stars Want to Sell/Want to Buy / Re: Adjustable Powder Bar
« on: May 24, 2015, 10:32:37 AM »
Just thought you'd like to know abettertrip.com sent you $123.00 USD.
 
 Easygoing 

 Thanks Kenneth, I will get Adjustable powder slide packaged up
 and I will send you a tracking number when I ship.

 Buckhunter 

14
Stars Want to Sell/Want to Buy / Re: Adjustable Powder Bar
« on: May 23, 2015, 08:37:06 PM »
 Can't wait! :),  Thanks for the E-Mail, I will hold the adjustable
 powder slide for you.


 Buckhunter

15
   I have one Adjustable Powder slide left, This one is
   brass and was made by Barrel Tester. I can sell you
   this one for $115.00 plus $8.00 for shipping.

  Buckhunter    buckhamman    at    Comcast   dot   net

  Note: The Hoag Adjustable Powder Slide has been sold.
  Note: The Brass Adjustable Powder Slide has also been
           sold. Thanks everyone!

* P1010001.JPG (74.9 kB, 480x261 - viewed 0 times.)

Pages: 1 2 3 4 5 6 »
anything
anything